GCE Group ANNUNCIA IL NUOVO BRAND SCOPRI DI PIU close
Home » Cerca un prodotto
GCE ProControl® (IT)

La linea di riduttori di pressione premium GCE ProControl® è stata progettata per essere utilizzata nella maggior parte delle applicazioni di gas tecnici industriali in bombole e pacchi bombole con pressione fino a 300 bar. I riduttori di pressione sono realizzati rispettando le norme e gli standard relativi ai collegamenti di ingresso ed uscita, ai manometri, alla pressione di esercizio ed ai requisiti di sicurezza. La portata è

DIAPHRAGM REGULATING VALVES MVR 500 G

The regulating valve MVR 500 has a very good regulating characteristic and is very finely adjustable both by greater as also by lesser flow rate values. APPLICATION As a system component in and low pressure areas. As accessory for cylinder and point-of-use regulators for fine adjustment of the gas flow. As system element in apparatus and analytical equipment. Very fine gas flow adjustment Wide flow rate range for high and low pressure appli

CYLINDER PRESSURE REGULATORS FMD 320-14/-16/-18

These pressure regulators consist of cylinder connections, pressure regulator, inlet- and outlet gauges, diaphragm shut-off valve (Type -16) regulating valve (Type -18), relief valve, tube fitting on outlet. APPLICATION The FMD 320-14 is the base model. The FMD 320-16 permits shutting-off of the gas flow while maintaining the pressure regulator settings, the regulating valve on the FMD 320-18 enables a fine apportioning of the gas flow. Diap

PROPANE GAS PANELS

The single cylinder station consists of a low pressure regulator, 400 mm medium pressure hose with a safety shut-off valve and a safety relief valve. The double cylinder station consists of a low pressure regulator, a safety shut-off valve (connected upstream) and safety relief valve, 2 high pressure hoses with cylinder connections, a support rail, semi-automatic switch-over valve PN 16, the extraction is rotationally achieved. Both stations conf

CYLINDER PRESSURE REGULATORS FMD 322-14/-16/-18

These pressure regulators consist of cylinder connections, pressure regulator, inlet- and outlet gauges, diaphragm shut-off valve (Type -16) regulating valve (Type -18), relief valve, tube fitting on outlet. APPLICATION The FMD 322-14 is the base model. The FMD 322-16 permits shutting-off of the gas flow while maintaining the pressure regulator settings, the regulating valve on the FMD 322-18 enables a fine controling of the gas flow. The dual-

SEMI-AUTOMATIC SWITCH-OVER ACETYLEN BMD 202-39

The gas supply panel BMD 202-39 guarantees an uninterrupted acetylene supply through the automatic switchover from the empty side to the full reserve side. This pressure regulating station is approved for the connection of maximum 6 cylinders. A flashback arrestor is installed on the outlet side. The use of contact gauge (accessories) in conjunction with alarm box (accessories) facilitates the monitoring of gas reserves. The station is mounted on

CYLINDER PRESSURE REGULATORS FMD 300-14/-18

The FMD 300-14 consists of manual cylinder connection with knurled nut (supplied), pressure regulator, upstream pressure gauge, downstream pressure gauge, relief valve and screw connections. The FMD 300-18 has in addition a regulating valve at the outlet. The customary hose fittings and couplings are available as accessories (see ordering information). The inlet on the back end allows for particularly space saving installation. APPLICATION The

DIAPHRAGM SHUT-OFF VALVES MVA 500/530

The diaphragm valve MVA 500 is characterized through its outstanding functional safety and high leak-tightness. The open/closed position on the valve is achieved through a 90°-turn of the handle (with a click into the end position). APPLICATION As a line shut-off in a centralized high purity gas supply. As a system component in high and low pressure areas. Quick operation through 90° shut-off function Clearly visible open/closed pos

PACKED REGULATING VALVES FAV 115 V/T

These packed valves are mounted directly on the cylinder valve. APPLICATION For the extraction and adjustment of corrosive gases from pressurised gas cylinders. The cylinder valve serves, for example, the constant adjustment of gases in pressureless polymerisations process. Housing and cylinder connection made out of electro-polished stainless steel Regulating cone made out of hard metal Stuffi ng box material woven PTFE Angle formed, nom

POINT-OF-USE REGULATORS EMD 500/510-06

The EMD 500-06 consists of an upstream shut-off valve, pressure regulator, downstream gauges and Aluminium panel for wall mounting. A relief valve can be ordered as an optional extra. APPLICATION The EMD 500/510-06 is designed as an access point to a central gas supply system and thereby designed as a second stage, whereby the line pressure of apparatuses up to 0,2 bar absolute can be regulated downward. The EMD 510 is also suitable for sub-atm