GCE Group ANNUNCIA IL NUOVO BRAND SCOPRI DI PIU close
Home » MEDIWET

MEDIWET

Codice gruppo: 3323

The humidifier for oxygen therapy is a device allowing an increse in the relative humidity in the oxygen supplied to the patient; this gas for medical use normally lacks a sufficient humidity grade to be physiologically tolerated.

The jar is made of polycarbonate, or polysulphone the cap with inlet adaptor of polypropylene and inlet connection of polypropylene + coated brass.

Art. Nr. Description Inlet connection
K294432 MEDIWET 134°C G 3/8"
K293498 MEDIWET 134°C M 12×1,25
K294435 MEDIWET 134°C G 1/4"
K294402 MEDIWET 134°C 9/16" UNF
K294416 MEDIWET 121°C G 3/8"
K293491 MEDIWET 121°C M 12×1,25
K294452 MEDIWET 121°C G 1/4"
K294401 MEDIWET 121°C 9/16" UNF

TECHNICAL DATA

Contents: Only sterile water
Dimensions: Height 190 × Width 85 (incl hose nipple) × ∅60 mm
Weight: 150 g
Capacity: 200 ml of water
Material: Jar polycarbonate (autoclavable at 121 °C)

Jar polysulphone (autoclavable at 134 °C)

Lid and outlet hose nipple: polypropylene
Inlet nut: The brass thread and it is injected to the plastic hand nut
Diffuser: Polyethylene
Hose: Silicone
Gasket: O-ring NBR
Outlet connection: Tapered hose nipple for hose 6 × 9 mm (recommended length 2 m)
Cleaning: Water, non abrasive detergent. Never use solvents.
Disinfection: An alcoholic solution, or other solution compatible with the material according to the disinfectant manufacturer.
Autoclave: Polycarbonate version 121°C for 20 minutes

Polysulphone version 134°C for 18 minutes
Special case:  
Diffuser: Exchange at every cleaning - do not sterilise!
Maintenance: Check that the humidifier is whole and air tight before use. Monthly exchange of gaskets is recommended. Exchange the diffuser when its microperforations no longer exist.
Durability: Minimum 20 autoclave cycles undr the condition that all instructions accompanying the product are adhered.

SPARE PARTS

Art. Nr. Description
K294486 Silicone hose, 10 pcs
K294434 Silicone hose + diffuser, 10 pcs
K294415 Diffuser, 10 pcs
K294408 Washer 121°C (under lid) 10 pcs
K294409 Washer 134°C (under lid) 10 pcs

 

Art. Nr. Inlet connection
K294433 O-ring G 3/8", (10 pcs)
K294404 O-ring M 12×1,25, (10 pcs)
K294407 O-ring G 1/4" and 9/16" UNF, (10 pcs)
Scarica Top

Altri downoads per questo prodotto

Acrobat Logo MEDIWET_Leaflet_English.pdf